Grundfos CR 1-2 A-FGJ-A-E-HQQE
Product ID: 99140296
Request Price and Availability
Grundfos CR 1-2 A-FGJ-A-E-HQQE
Grundfos CR 1-2 A-FGJ-A-E-HQQE
| Liquid: | |
| Pumped liquid: | Water |
| Liquid temperature range: | -20 .. 120 °C |
| Selected liquid temperature: | 20 °C |
| Density: | 998.2 kg/m³ |
| Technical: | |
| Pump speed on which pump data are based: | 1700 rpm |
| Rated flow: | 1.1 m³/h |
| Rated head: | 3.6 m |
| Pump orientation: | Vertical |
| Shaft seal arrangement: | Single |
| Primary shaft seal: | HQQE |
| Code for shaft seal: | HQQE |
| Approvals: | CURUS |
| Approvals for drinking water: | NSF/ANSI 61 |
| Curve tolerance: | ISO9906:2012 3B |
| Materials: | |
| Base: | Cast iron |
| EN 1561 EN-GJL-200 | |
| ASTM A48-25B | |
| Impeller: | Stainless steel |
| EN 1.4301 | |
| AISI 304 | |
| Installation: | |
| Maximum ambient temperature: | 40 °C |
| Maximum operating pressure: | 25 bar |
| Max pressure at stated temp: | 25 bar / 120 °C |
| 25 bar / -20 °C | |
| Type of connection: | DIN / ANSI / JIS |
| Size of inlet connection: | DN 25/32 |
| 1 1/4 inch | |
| Size of outlet connection: | DN 25/32 |
| 1 1/4 inch | |
| Pressure rating for connection: | PN 25 |
| Flange rating inlet: | 250 lb |
| Flange size for motor: | 56C |
| Electrical data: | |
| Motor standard: | NEMA |
| Motor type: | BALDOR |
| Rated power - P2: | 0.25 kW |
| Power (P2) required by pump: | 0.25 kW |
| Mains frequency: | 60 Hz |
| Rated voltage: | 1 x 115/230 V |
| Service factor: | 1.35 |
| Rated current: | 6/3 A |
| Rated speed: | 1725 rpm |
| Motor efficiency at full load: | 60 % |
| Number of poles: | 4 |
| Enclosure class (IEC 34-5): | IP54 |
| Insulation class (IEC 85): | B |
| Motor No: | 84654601 |
| Controls: | |
| Frequency converter: | None |
| Pressure sensor: | N |
| Others: | |
| Net weight: | 26.9 kg |
| Gross weight: | 31.9 kg |
| Shipping volume: | 0.14 m³ |