Grundfos MS6000REST40 (78335617)
Product ID: 78335617
Request Price and Availability
Grundfos MS6000REST40 (78335617)
Grundfos MS6000REST40 (78335617)
The motor is a 3-phase motor of the canned type with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.
| Liquid: | |
| Max liquid t at 0.15 m/sec: | 40 °C |
| Technical: | |
| Shaft seal for motor: | SIC/SICFKM |
| CE approved (Yes/No): | Y |
| Motor version: | T40 |
| Materials: | |
| Motor: | Stainless steel |
| DIN W.-Nr. 1.4539 | |
| AISI 904L | |
| Installation: | |
| Maximum ambient pressure: | 60 bar |
| Motor diameter: | 6 inch |
| Electrical data: | |
| Motor type: | MS6000 |
| Rated power - P2: | 18.5 kW |
| Mains frequency: | 60 Hz |
| Rated voltage: | 3 x 380-400 V |
| Voltage tolerance: | +6/-10 % |
| Service factor: | 1.15 |
| Rated current: | 48.0-47.0 A |
| Maximum current consumption: | 48 A |
| Starting current: | 570-620 % |
| Cos phi - power factor: | 0.84-0.81 |
| Rated speed: | 3470-3490 rpm |
| Rated full-load torque: | 58.5 Nm |
| Locked-rotor torque: | 150-170 % |
| Breakdown torque: | 280-310 % |
| Moment of inertia: | 0.0084 kg m² |
| Axial load max: | 27 kN |
| Start. method: | direct-on-line |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | F |
| Built-in temp. transmitter: | yes |
| Winding resistance: | 0.430 Ohm |
| Windings: | Enamelled |
| Others: | |
| Net weight: | 58 kg |
Applications
- Community water supply — Reliable, sustainable and low-risk community water systems from source to tap, including water management and revenue collection systems, for low-income remote or informal urban settlement areas in developing countries.