Grundfos MS6000XT40 (78104517)
Product ID: 78104517
Request Price and Availability
Grundfos MS6000XT40 (78104517)
Grundfos MS6000XT40 (78104517)
The motor is a 3-phase motor of the canned type with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.
| Liquid: | |
| Max liquid t at 0.15 m/sec: | 40 °C |
| Technical: | |
| Shaft seal for motor: | CER/CARNBR |
| CE approved (Yes/No): | Y |
| Motor version: | T40 |
| Materials: | |
| Motor: | Stainless steel |
| DIN W.-Nr. 1.4301 | |
| AISI 304 | |
| Installation: | |
| Maximum ambient pressure: | 60 bar |
| Motor diameter: | 6 inch |
| Electrical data: | |
| Motor type: | MS6000 |
| Rated power - P2: | 18.5 kW |
| Mains frequency: | 50 Hz |
| Rated voltage: | 3 x 220-230 V |
| Voltage tolerance: | +6/-10 % |
| Rated current: | 72.5-71 A |
| Starting current: | 510-550 % |
| Cos phi - power factor: | 0.85-0.82 |
| Rated speed: | 2860-2880 rpm |
| Rated full-load torque: | 61.8 Nm |
| Locked-rotor torque: | 150-170 % |
| Breakdown torque: | 240-270 % |
| Moment of inertia: | 0.0084 kg m² |
| Axial load max: | 27 kN |
| Start. method: | direct-on-line |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | F |
| Built-in temp. transmitter: | no |
| Winding resistance: | 0.213 Ohm |
| Windings: | Enamelled |
| Others: | |
| Net weight: | 58 kg |
Applications
- Community water supply — Reliable, sustainable and low-risk community water systems from source to tap, including water management and revenue collection systems, for low-income remote or informal urban settlement areas in developing countries.