Grundfos MS 402 (96465630)
Product ID: 96465630
Request Price and Availability
Grundfos MS 402 (96465630)
Grundfos MS 402 (96465630)
The motor is a 3-phase motor of the canned type with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.
| Technical: | |
| Shaft seal for motor: | LIPSEAL |
| Approvals: | CE,EAC,CSACOMP |
| Motor version: | T40 |
| Materials: | |
| Motor: | Stainless steel |
| DIN W.-Nr. 1.4301 | |
| AISI 304 | |
| Installation: | |
| Maximum ambient pressure: | 15 bar |
| Motor diameter: | 4 inch |
| Electrical data: | |
| Motor type: | MS402 |
| Rated power - P2: | 1.5 kW |
| Mains frequency: | 60 Hz |
| Rated voltage: | 3 x 230 V |
| Voltage tolerance: | +10/-10 % |
| Service factor: | 1.25 |
| Rated current: | 8.7 A |
| Maximum current consumption: | 8.7 A |
| Starting current: | 540 % |
| Cos phi - power factor: | 0.75 |
| Rated speed: | 3450 rpm |
| Rated full-load torque: | 5.2 Nm |
| Locked-rotor torque: | 250 % |
| Breakdown torque: | 360 % |
| Moment of inertia: | 0.0008 kg m² |
| Start. method: | direct-on-line |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | B |
| Built-in temp. transmitter: | no |
| Winding resistance: | 2.28 Ohm |
| Windings: | Enamelled |
Applications
- Community water supply — Reliable, sustainable and low-risk community water systems from source to tap, including water management and revenue collection systems, for low-income remote or informal urban settlement areas in developing countries.