Grundfos MS 402 (79753405)
Product ID: 79753405
Request Price and Availability
Grundfos MS 402 (79753405)
Grundfos MS 402 (79753405)
The motor is a 1-phase motor of the canned type with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.
| Liquid: | |
| Max liquid t at 0.15 m/sec: | 40 °C |
| Technical: | |
| Shaft seal for motor: | LIPSEAL |
| Approvals: | CE,EAC |
| Motor version: | T40 |
| Materials: | |
| Motor: | Stainless steel |
| DIN W.-Nr. 1.4301 | |
| AISI 304 | |
| Installation: | |
| Maximum ambient pressure: | 15 bar |
| Motor diameter: | 4 inch |
| Electrical data: | |
| Motor type: | MS402 |
| Motor type 1-phase: | PSC |
| Rated power - P2: | 1.1 kW |
| Mains frequency: | 50 Hz |
| Rated voltage: | 1 x 220-230-240 V |
| Voltage tolerance: | +6/-6 % |
| Rated current: | 8.00-8.20-8.40 A |
| Starting current: | 430-440 % |
| Cos phi - power factor: | 0.99-0.96-0.92 |
| Rated speed: | 2820-2830-2850 rpm |
| Rated full-load torque: | 3.75 Nm |
| Locked-rotor torque: | 50-70 % |
| Breakdown torque: | 200-200-200 % |
| Moment of inertia: | 0.0008 kg m² |
| Capacitor size - run: | 40 µF/400 V |
| Start. method: | direct-on-line |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | B |
| Built-in temp. transmitter: | no |
| Windings: | Enamelled |
| Others: | |
| Net weight: | 10.5 kg |
Applications
- Community water supply — Reliable, sustainable and low-risk community water systems from source to tap, including water management and revenue collection systems, for low-income remote or informal urban settlement areas in developing countries.