Grundfos MS4000 ARBSWLMXT4 (7C752702)
Product ID: 7C752702
Request Price and Availability
Grundfos MS4000 ARBSWLMXT4 (7C752702)
Grundfos MS4000 ARBSWLMXT4 (7C752702)
The motor is a 1-phase motor of the canned type with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.
| Liquid: | |
| Liquid temperature range: | -15 .. 40 °C |
| Technical: | |
| Approvals for motor: | CE,EACMOROCCO,UKCA,SEPRO,RCM |
| Model: | C |
| Motor version: | T40 |
| Specification for shaft end: | SPLINE 14X24/48-30 ANSI B92.1 |
| Materials: | |
| Motor: | Stainless steel |
| EN 1.4539 | |
| AISI 904L | |
| Shaft seal: | SiC/SiC |
| Installation: | |
| Maximum ambient pressure: | 60 bar |
| Thread standard: | ISO 724 |
| Motor diameter: | 4 inch |
| Electrical data: | |
| Motor type: | MS4000 |
| Rated power - P2: | 0.37 kW |
| Mains frequency: | 50 Hz |
| Rated voltage: | 1 x 220-240 V |
| Voltage tolerance: | +6/-10 % |
| Rated current: | 3.3 A |
| Starting current: | 370-400 % |
| Cos phi - power factor: | 0.99-0.94 |
| Rated speed: | 2800-2830 rpm |
| Rated full-load torque: | 1 Nm |
| Breakdown torque: | 2.9-3.6 Nm |
| Moment of Inertia: | 0.0009 kg m² |
| Maximum axial load: | 450 kg |
| Capacitor size - run: | 16 µF/400 V |
| Method of start: | Direct-on-line PSC |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | F |
| Built-in motor protection: | NONE |
| Thermal protection: | External |
| Built-in temp. transmitter: | No |
| Winding resistance: | 0.000 Ohm |
| R s1: | 11.400 Ohm |
| Resistance in operating winding: | 7.360 Ohm |
| Windings: | Enameled |
| Others: | |
| Net weight: | 13 kg |
| Gross weight: | 13 kg |
| Shipping volume: | 0.004 m³ |
| Environmental approvals for motor: | WEEE |
Applications
- Community water supply — Reliable, sustainable and low-risk community water systems from source to tap, including water management and revenue collection systems, for low-income remote or informal urban settlement areas in developing countries.