Grundfos MS4000 AZBCWLUJT4 (7C303512)
Product ID: 7C303512
Request Price and Availability
Grundfos MS4000 AZBCWLUJT4 (7C303512)
Grundfos MS4000 AZBCWLUJT4 (7C303512)
| Liquid: | |
| Liquid temperature range: | -15 .. 40 °C |
| Technical: | |
| Approvals for motor: | CCSAUS,C_UL_US_NSF372 |
| Model: | C |
| Motor version: | T40 |
| Specification for shaft end: | SPLINE 14X24/48-30 ANSI B92.1 |
| Materials: | |
| Motor: | Stainless steel |
| EN 1.4301 | |
| AISI 304 | |
| Shaft seal: | HM/Ceramics |
| Installation: | |
| Maximum ambient pressure: | 60 bar |
| Thread standard: | UNF |
| Motor diameter: | 4 inch |
| Electrical data: | |
| Motor type: | MS4000 |
| Rated power - P2: | 7.5 kW |
| KVA code: | J |
| Mains frequency: | 60 Hz |
| Rated voltage: | 3 x 208-220-230 V |
| Voltage tolerance: | +6/-10 % |
| Service factor: | 1.15 |
| Rated current: | 32.8-31.4-30.5 A |
| Maximum current consumption - service factor: | 35.0-33.0-32.3 A |
| Starting current: | 500-570-620 % |
| Cos phi - power factor: | 0.87-0.84-0.81 |
| Rated speed: | 3420-3450-3470 rpm |
| Speed - service factor: | 3370-3410-3740 rpm |
| Rated full-load torque: | 21-21-21 Nm |
| Locked-rotor torque: | 180-200-230 % |
| Breakdown torque: | 50.9-57.6-63.7 Nm |
| Moment of Inertia: | 0.0036 kg m² |
| Maximum axial load: | 450 kg |
| Method of start: | Direct-on-line (DOL) |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | F |
| Built-in motor protection: | NONE |
| Thermal protection: | External |
| Built-in temp. transmitter: | Yes |
| Winding resistance: | 0.560 Ohm |
| Windings: | Enameled |
| Others: | |
| Net weight: | 31 kg |
| Gross weight: | 31 kg |
| Shipping volume: | 0.008 m³ |
| Environmental approvals for motor: | WEEE |
Applications
- Community water supply — Reliable, sustainable and low-risk community water systems from source to tap, including water management and revenue collection systems, for low-income remote or informal urban settlement areas in developing countries.