Grundfos MMS 8000 N (96023224)
Product ID: 96023224
Request Price and Availability
Grundfos MMS 8000 N (96023224)
Grundfos MMS 8000 N (96023224)
The motor is a 3-phase motor of the wet winded rewindable type with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.
| Liquid: | |
| Max liquid t at 0.15 m/sec: | 35 °C |
| Max liquid t at 0.5 m/sec: | 40 °C |
| Technical: | |
| Shaft seal for motor: | SIC/SIC |
| Motor version: | T40 |
| Materials: | |
| Motor: | Stainless steel |
| DIN W.-Nr. 1.4401 | |
| AISI 316 | |
| Rubber: | NBR |
| Installation: | |
| Motor diameter: | 8 inch |
| Electrical data: | |
| Motor type: | MMS8000 |
| Rated power - P2: | 110 kW |
| Mains frequency: | 50 Hz |
| Rated voltage: | 3 x 440-460-480 V |
| Voltage tolerance: | +6/-10 % |
| Rated current: | 230-224-222 A |
| Starting current: | 520-580-600 % |
| Cos phi - power factor: | 0.89-0.87-0.84 |
| Rated speed: | 2870-2890-2900 rpm |
| Rated full-load torque: | 365 Nm |
| Locked-rotor torque: | 160-190-210 % |
| Breakdown torque: | 260-300-320 % |
| Moment of inertia: | 0.088 kg m² |
| Motor efficiency at full load: | 86-87 % |
| Motor efficiency at 3/4 load: | 87 % |
| Motor efficiency at 1/2 load: | 86-85 % |
| Start. method: | direct-on-line |
| Enclosure class (IEC 34-5): | IP68 |
| Built-in temp. transmitter: | no |
| Winding resistance: | 0.080 Ohm |
| Windings: | PE2/PA |
| Others: | |
| Net weight: | 333 kg |
| Shipping volume: | 0.239 m³ |
Applications
- Community water supply — Reliable, sustainable and low-risk community water systems from source to tap, including water management and revenue collection systems, for low-income remote or informal urban settlement areas in developing countries.