Water Treatment Solutions
Lenntech Water treatment & purification

Grundfos DMX 35-10 AR-PVC/T/T-S-H1A9A9BEMNG (99773167)

Product ID: 99773167

Request Price and Availability

Grundfos DMX 35-10 AR-PVC/T/T-S-H1A9A9BEMNG (99773167)
Part Number: 99773167

Grundfos DMX 35-10 AR-PVC/T/T-S-H1A9A9BEMNG (99773167)

The 221 pump of the DMX series is a versatile positive displacement diaphragm dosing pump. The diaphragm is coupled mechanically via a precise gear-eccenter-tapet-system to a high efficiency AC motor. The dosing capacity is adjusted by varying the stroke length at the stroke adjustment knob in the ratio 1:10. The liquid end is composed of:

  • Dosing head
  • PTFE coated diaphragm
  • Double ball valves up to 50 l/h and single ball valves from 60 l/h

Other features:

  • Robust industrial pump with chemical resistance plastic enclosure
  • Easy to install and operate design
  • Long life PTFE coated diaphragm
  • Optimum capacity and stroke frequency graduation
  • Dosing flow variation ±1.5% (FS), linearity ±4% (FS)

Electronics features:
Applies only to pumps with control variant: AR
Etron Profi microprocessor electronics, direct attached to motor:

  • Stroke frequency adjustable from 1 stroke/min to maximum stroke frequency
  • Pulse control with multiplier and divisor
  • Analogue signal control 0/4-20 mA
  • Level control with input for two level signals.
  • Pulse, analogue and remote on/off input
  • Analogue output
  • Alarm relay output
  • Stroke output
  • Input for dosing controller and diaphragm monitoring sensor

Applies only to pumps with control variant: D3

  • Automatic adjustment of stroke length via direct drive control or mA-input signal
  • For further specifications please refer to servomotor

Controls:
Type of connector:Type B (NEMA 5-20)
Type of control variant:AR Electronic
Frequency converter:Not prepared for VFD
Liquid:
Pumped liquid:Water
Liquid temperature range:0 .. 40 °C
Selected liquid temperature:20 °C
Density:998.2 kg/m³
Technical:
Nominal flow rate at 60 Hz:42 l/h
Number of dosing heads:1
Approvals:CE,EAC,CNROHSEX,PROP65
Non return valve type, inlet pump 1:Standard
Non return valve type, outlet pump 1:Standard
Max viscosity:100 mPas
Materials:
Pump housing:Thermoplastic
Dosing head, pump 1:Plastic
 PVC
Valve ball:Composite
 PTFE
Valve seat:Composite
 PTFE
Valve gasket:PTFE
 Composite
Installation:
Max operating pressure at 60 Hz:10 bar
Maximum permissible inlet pressure:0 bar
Type of inlet connection:NPT(M)
Type of outlet connection:NPT(M)
Size of inlet connection:1/2 inch
Size of outlet connection:1/2 inch
Electrical data:
Power input P1:0.09 kW
Mains frequency:60 Hz
Max. frequency:60 Hz
Rated voltage:1 x 110/120 V
Enclosure class (IEC 34-5):IP65
Cable included (Yes/No):Y
Power plug:US plug
Others:
Net weight:7 kg
Gross weight:9.55 kg
Shipping volume:0.04 m³
Diaphragm Leakage Detection:N

Applications

  • Commercial water disinfection — Grundfos supplies dosing pumps and systems for commercial water disinfection, anti-scaling, anti-fouling and anti-corrosion for domestic water systems, air conditioning systems, boiler and heating systems.
  • Industrial cooling — Industrial applications, such as machining processes and heating systems rely on the efficient transfer of heat. Grundfos supplies efficient, reliable pumps and systems for a broad range of cooling applications and for OEM cooling units.
  • Industrial process water treatment — Our advanced pumping solutions are more intelligent, more capable and more reliable, with autonomous, data-driven technology that connects and optimizes your entire system  ultimately saving you time, money and maintenance.
  • Process liquids transfer — A wide range of pumps for the transfer of water, cooling lubricants and other liquids in industrial and process systems.

category

  • Mechanical dosing pumps
    Get a complete overview of the robust, diaphragm-based mechanical dosing pumps from Grundfos for demanding water treatment and industrial applications.