Grundfos CRE 3-6 HN --- (98497027)

Product ID: 98497027

Request Price and Availability

Grundfos CRE 3-6 HN --- (98497027)
Part Number: 98497027

Grundfos CRE 3-6 HN --- (98497027)

Liquid:
Pumped liquid:Water
Liquid temperature range:-20 .. 120 °C
Selected liquid temperature:20 °C
Density:998.2 kg/m³
Technical:
Pump speed on which pump data are based:3484 rpm
Rated flow:3.5 m³/h
Rated head:42.1 m
Pump orientation:Horizontal
Shaft seal arrangement:Single
Primary shaft seal:HQQE
Code for shaft seal:HQQE
Approvals on nameplate:ANSI/NSF61
Curve tolerance:ISO9906:2012 3B
Materials:
Base:Cast iron
 EN-JL1030
 25B
Impeller:Stainless steel
 EN 1.4301
 AISI 304
Bearing:SIC
Installation:
Maximum ambient temperature:50 °C
Maximum operating pressure:16 bar
Max pressure at stated temp:16 bar / 120 °C
 16 bar / -20 °C
Size of inlet connection:1.5 inch
Size of outlet connection:1 inch
Pressure rating for connection:CLASS 150
Flange size for motor:56C
Electrical data:
Motor standard:NEMA
Motor type:80A
Rated power - P2:0.75 kW
Power (P2) required by pump:0.75 kW
Mains frequency:60 Hz
Rated voltage:3 x 440-480 V
Service factor:1.25
Rated current:1.65 A
Cos phi - power factor:0.73
Rated speed:360-4000 rpm
IE efficiency:86.4%
IE Efficiency class:IE5
Motor efficiency at full load:86.4 %
Enclosure class (IEC 34-5):IP55
Insulation class (IEC 85):F
Motor No:98510166
Others:
Net weight:70.7 kg
Gross weight:83 kg

category

  • Inline multi stage pumps
    In-line multi-stage pumps are used in installations in which a high head is needed. Several impeller stages are connected in series and the inlet and outlet are on the same level. In-line multi-stage pumps are used for water supply, water treatment and almost any industrial solution including those for aggressive liquids.