Grundfos AP80 .80.26.3.V (96005359)
Product ID: 96005359
Request Price and Availability
Grundfos AP80 .80.26.3.V (96005359)
Grundfos AP80 .80.26.3.V (96005359)
Submersible sewage pump
Vertical single-stage cast iron submersible pump with integrated submersible 3-phase 4-pole motor.
The pump is fitted with a lifting bracket and is supplied with a 10 m mains cable suitable for connection to a DOL motor starter.
The impeller is a VORTEX impeller for 80 mm free passage suitable for pumping surface water, groundwater, raw sewage and wastewater.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The motor is insulation class F and equipped with thermal motor protection and long-life deep-groove greased-for-life ball bearings.
ready for installation on an auto-coupling system or with ring stand for free-standing installation or portable use.
| Controls: | |
| Moisture sensor: | without moisture sensors |
| Liquid: | |
| Liquid temperature range: | 0 .. 40 °C |
| Selected liquid temperature: | 20 °C |
| Density: | 998.2 kg/m³ |
| Technical: | |
| Maximum flow: | 25.8 l/s |
| Type of impeller: | VORTEX |
| Max. Particle: | 80 mm |
| Approvals: | CE |
| Materials: | |
| Pump housing: | Cast iron |
| EN-GJL-200 | |
| ASTM A48-35 | |
| Pump: | EN-JL1040 |
| Impeller: | Cast iron |
| EN-JL1040 | |
| ASTM A48-35 | |
| Motor house: | Cast iron |
| EN 1561 EN-GJL-200 | |
| AISI 304 | |
| Installation: | |
| Range of ambient temperature: | -20 .. 40 °C |
| Maximum operating pressure: | 6 bar |
| Type of connection: | DIN |
| Size of connection: | DN 80 |
| Pressure rating for connection: | PN 10 |
| Maximum installation depth: | 20 m |
| Inst dry/wet: | SUBMERGED |
| Electrical data: | |
| Power input P1: | 3.4 kW |
| Rated power - P2: | 2.6 kW |
| Mains frequency: | 50 Hz |
| Rated voltage: | 3 x 400 V |
| Rated current: | 6.3 A |
| Cos phi - power factor: | 0.8 |
| Rated speed: | 1450 rpm |
| Number of poles: | 4 |
| Method of start: | DOL |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | H |
| Ex-protection standard: | NON EX |
| Built-in motor protection: | CONTACT |
| Thermal protection: | YES |
| Length of power cable: | 10 m |
| Power plug: | NONE |
| Others: | |
| Net weight: | 66 kg |
| Gross weight: | 70 kg |
Applications
- Domestic wastewater — With a series of optimised drainage pump systems, lifting stations and sump pumps, you can gain full control of domestic wastewater.
category
- Submersible wastewater pumpsGrundfos submersible wastewater pumps are designed as sealed units combining a pump and integrated motor that can operate below the surface of wastewater. Submersible wastewater pumps are perfect in permanent installations for efficient removal of wastewater from a property whether from washing machines, sinks and showers or drainage from the garden.