Grundfos SFG.110.150 .H.83.5.1B (99263955)
Product ID: 99263955
Request Price and Availability
Grundfos SFG.110.150 .H.83.5.1B (99263955)
Grundfos SFG.110.150 .H.83.5.1B (99263955)
| Specification | Value | |
|---|---|---|
| Technical: | ||
| Thrust to power: | 0.418 | |
| Axial trust force: | 4500 N | |
| Rated flow: | 1990 l/s | |
| Mean velocity: | 1.13 m/s | |
| Propeller speed: | 83 rpm | |
| Tip speed: | 6.53 m/s | |
| Gear ratio: | 17.679 | |
| Propeller diameter: | 1500 mm | |
| Number of propeller blades: | 3 | |
| Primary shaft seal: | 2 RADIAL LIP SEALS | |
| Testing standard: | ISO 21630 | |
| Materials: | ||
| Motor: | AISI EN-GJL-250 | |
| Propeller: | 1.4301 | |
| Hub: | AISI 1.4301 | |
| Paint thickness: | 450 micrometre | |
| Secondary shaft seal: | TUNGSTEN-CARBIDE/TUNGSTEN-CARB | |
| Installation: | ||
| Maximum installation depth: | 20 m | |
| Liquid: | ||
| Liquid temperature range: | 5 .. 60 °C | |
| Electrical data: | ||
| Power input - P1: | 12 kW | |
| Power input Act: | 10.76 kW | |
| Rated power - P2: | 11 kW | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 3 x 400-415 V | |
| Voltage tolerance: | +6/-10 % | |
| Rated current: | 23 A | |
| Starting current: | 165 A | |
| Cos phi - power factor: | 0.77 | |
| Cos phi - p.f. at 3/4 load: | 0.69 | |
| Cos phi - p.f. at 1/2 load: | 0.55 | |
| Rated speed: | 1461 rpm | |
| Motor efficiency at full load: | 91.5 % | |
| Motor efficiency at 3/4 load: | 91.6 % | |
| Motor efficiency at 1/2 load: | 90.3 % | |
| Number of poles: | 4 | |
| Start. method: | star/delta | |
| Enclosure class (IEC 34-5): | IP68 | |
| Insulation class (IEC 85): | H | |
| Explosion proof: | no | |
| Built-in motor protection: | PTC THERMISTOR | |
| Power cable type: | LAPP TPE 7G4+4X1 | |
| Length of power cable: | 15 m | |
| Power plug: | No plug | |
| Controls: | ||
| Moisture sensor: | without moisture sensors | |
| Water-in-oil sensor: | with water-in-oil sensor | |
| Others: | ||
| Net weight: | 313 kg | |
Applications
- Wastewater treatment — Treating wastewater is about maintaining optimal and effective processes at mechanical, biological and chemical treatment stages. A full-line supplier, Grundfos ensures that hydraulic stability is maintained and capacity not exceeded for all processes.
category
- AgitatorsAgitators, such as small-scale submersible mixers and large-scale flowmakers, are designed for prefabricated pumping stations and large tanks respectively. They ensure that particles remain evenly distributed in wastewater and sludge, preventing sedimentation and supporting treatment processes.
- Submersible wastewater pumpsGrundfos submersible wastewater pumps are designed as sealed units combining a pump and integrated motor that can operate below the surface of wastewater. Submersible wastewater pumps are perfect in permanent installations for efficient removal of wastewater from a property whether from washing machines, sinks and showers or drainage from the garden.