Grundfos SFG.22.130 .74.5.1B (98787848)
Product ID: 98787848
Request Price and Availability
Grundfos SFG.22.130 .74.5.1B (98787848)
Grundfos SFG.22.130 .74.5.1B (98787848)
| Technical: | |
| Thrust to power: | 0.649 |
| Axial trust force: | 1480 N |
| Rated flow: | 991 l/s |
| Mean velocity: | 0.75 m/s |
| Propeller speed: | 74 rpm |
| Tip speed: | 5.04 m/s |
| Gear ratio: | 19.911 |
| Propeller diameter: | 1300 mm |
| Number of propeller blades: | 2 |
| Primary shaft seal: | 2 RADIAL LIP SEALS |
| Testing standard: | ISO 21630 |
| Materials: | |
| Motor: | AISI EN-GJL-250 |
| Hub: | AISI 1.4301 |
| Paint thickness: | 450 micrometre |
| Secondary shaft seal: | SIC/SIC |
| Installation: | |
| Maximum installation depth: | 20 m |
| Fits column profile tube, size: | 100/100 mm |
| Liquid: | |
| Liquid temperature range: | 5 .. 40 °C |
| Electrical data: | |
| Power input - P1: | 2.5 kW |
| Power input Act: | 2.28 kW |
| Rated power - P2: | 2.2 kW |
| Mains frequency: | 50 Hz |
| Rated voltage: | 3 x 400-415 V |
| Voltage tolerance: | +6/-10 % |
| Rated current: | 4.9 A |
| Starting current: | 47 A |
| Cos phi - power factor: | 0.78 |
| Cos phi - p.f. at 3/4 load: | 0.69 |
| Cos phi - p.f. at 1/2 load: | 0.55 |
| Rated speed: | 1450 rpm |
| Motor efficiency at full load: | 87.8 % |
| Motor efficiency at 3/4 load: | 87.3 % |
| Motor efficiency at 1/2 load: | 84.9 % |
| Number of poles: | 4 |
| Start. method: | star/delta |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | H |
| Explosion proof: | no |
| Built-in motor protection: | PTC THERMISTOR |
| Length of power cable: | 15 m |
| Power plug: | No plug |
| Controls: | |
| Moisture sensor: | without moisture sensors |
| Water-in-oil sensor: | with water-in-oil sensor |
| Others: | |
| Net weight: | 97 kg |
Applications
- Wastewater treatment — Treating wastewater is about maintaining optimal and effective processes at mechanical, biological and chemical treatment stages. A full-line supplier, Grundfos ensures that hydraulic stability is maintained and capacity not exceeded for all processes.
category
- AgitatorsAgitators, such as small-scale submersible mixers and large-scale flowmakers, are designed for prefabricated pumping stations and large tanks respectively. They ensure that particles remain evenly distributed in wastewater and sludge, preventing sedimentation and supporting treatment processes.
- Submersible wastewater pumpsGrundfos submersible wastewater pumps are designed as sealed units combining a pump and integrated motor that can operate below the surface of wastewater. Submersible wastewater pumps are perfect in permanent installations for efficient removal of wastewater from a property whether from washing machines, sinks and showers or drainage from the garden.