Aquafine UV Water Treatment Systems

Aquafine UV systems for industrial water treatment
Aquafine offers ultraviolet systems for microbial inactivation and, depending on the model and configuration, reduction of ozone, chlorine, chloramine and total organic carbon (TOC). The ranges below serve applications from low-flow laboratory water to industrial process and high-purity water systems.
Explore the Aquafine range
| Series | Typical applications | Models |
|---|---|---|
| VL | Low-flow laboratory, pharmaceutical and electronics water | VL 200, VL 410, VL 410 TOC |
| OptiVenn | Industrial microbial inactivation and TOC reduction | 16 treatment models and 7 TOC models |
| Logic | Industrial water treatment and ozone reduction | 03AS20, 04AS20, 03AL20, 06AS20, 04AL20, 08AS20, 08AL20 |
| SwiftBeverage | Bioassay-validated treatment for food, beverage and pharmaceutical applications | SBV300, SBV600 |
| Avant | High-purity water and TOC reduction in microelectronics and life sciences | Avant 20, 36, 44 and 48; Avant and Avant HP configurations |
VL Series

Compact, single-lamp systems with a 316L stainless steel chamber, lamp-life display and audible alarms. Horizontal or vertical installation and optional UV monitoring provide flexibility for smaller water systems.
- VL 200: 11 US gpm (2.5 m³/h) at 94% UVT; 12 US gpm (2.7 m³/h) at 99% UVT.
- VL 410: 18 US gpm (4.1 m³/h) at 94% UVT; 20 US gpm (4.5 m³/h) at 99% UVT.
- VL 410 TOC: for trace-chemical reduction; capacity depends on the application.
Treatment ratings are based on a dose of 30 mJ/cm² after 9,000 operating hours. Treatment variants: VL200-AD, VL200-ADS, VL200-TD, VL200-TDS, VL410-AD, VL410-ADS, VL410-TD and VL410-TDS. Trace-chemical variants: VL410-AT, VL410-ATS, VL410-TT and VL410-TTS.
OptiVenn Series

A configurable industrial UV range with 316L stainless steel chambers for pharmaceutical, food and beverage, microelectronics and other process-water applications.
Microbial treatment models
01CDS, 02CDS, 03CDS, 02CDM, 02DDM, 03CDM, 04CDM, 04DDM, 04CDL, 04DDL, 06DDL, 08DDL, 08EDL, 08FDL, 10GDL and 12HDL.
TOC models
04CTM, 06CTM, 08DTM, 08DTL, 10DTL, 12DTM and 12DTL. The TOC range uses 4 to 12 lamps; model selection depends on water quality and the required reduction.
Logic Series

Low-pressure, high-output amalgam lamps in a compact L-shaped 316L stainless steel chamber. An automatic sleeve wiping system can clean the sleeves while the unit remains in operation.
| Model | Lamps | Treatment at 95% UVT (US gpm) | Treatment at 99% UVT (US gpm) |
|---|---|---|---|
| 03AS20 | 3 | 350 | 430 |
| 04AS20 | 4 | 435 | 435 |
| 03AL20 | 3 | 560 | 690 |
| 06AS20 | 6 | 695 | 835 |
| 04AL20 | 4 | 780 | 935 |
| 08AS20 | 8 | 875 | 975 |
| 08AL20 | 8 | 975 | 975 |
Treatment ratings are based on 30 mJ/cm² after 12,000 operating hours. Ozone reduction requires separate sizing.
SwiftBeverage Series

Bioassay-validated UV systems with high-output amalgam lamps, UV intensity monitoring and digital controls for food, beverage and pharmaceutical water treatment.
- SBV300: 3 lamps; operating power 830 W.
- SBV600: 6 lamps; operating power 1,590 W.
The series flow range is 106-254 US gpm (24-57 m³/h) at 97% UVT. The stated validated dose is 186 mJ/cm² after 12,000 hours under USEPA UVDGM conditions, for ANSI flange configurations only. Flow capacity is application-dependent.
Avant Series

Modular UV systems for high-purity industrial water, with 185 nm lamps for TOC reduction. A single touchscreen interface can control up to four systems. Avant uses natural quartz; Avant HP uses synthetic quartz.
| Model | Lamps | Maximum hydraulic flow (m³/h) |
|---|---|---|
| Avant 20 | 20 | 87.6 |
| Avant 36 | 36 | 196.9 |
| Avant 44 | 44 | 196.9 |
| Avant 48 | 48 | 340.6 |
Maximum hydraulic flow is a mechanical limit, not a TOC treatment capacity. Treatment sizing depends on the application and required water quality.
Selecting an Aquafine UV system
Discuss your flow rate, UV transmittance, water temperature and treatment target with Lenntech to identify a suitable system and configuration.