Common iodine salts in water

Common iodine salts include potassium iodide, sodium iodide, potassium iodate and sodium iodate. In water, these salts supply dissolved iodide or iodate ions. Their behaviour differs from that of elemental iodine.

This page complements the overview of iodine and water. For the element's properties, see iodine.

Common iodide and iodate salts

SaltFormulaIodine species releasedBehaviour in water
Potassium iodideKIIodide, I−Highly soluble; dissolves into potassium and iodide ions.
Sodium iodideNaIIodide, I−Highly soluble; dissolves into sodium and iodide ions.
Potassium iodateKIO3Iodate, IO3−Soluble, but less soluble than the common sodium and potassium iodides. Solubility depends on temperature and the surrounding salt solution.
Sodium iodateNaIO3Iodate, IO3−Soluble; temperature and high background salt concentrations affect how much dissolves.

These four compounds are familiar iodine chemicals used in salt fortification and chemical applications. Their inclusion here does not mean they are normally present as intact salt molecules in natural water. After dissolution, the ions mix with the other dissolved constituents. Research on sodium and potassium iodates documents the influence of temperature and concentrated salt solutions on solubility.

What happens when an iodine salt dissolves?

For example, potassium iodide dissociates as KI(s) → K+(aq) + I−(aq). Potassium iodate dissociates as KIO3(s) → K+(aq) + IO3−(aq). Dissolution releases the ions; it does not by itself turn iodide into iodate. Subsequent chemical reactions and the water's redox conditions can change the iodine species.

Iodide, iodate and iodine are different. Iodide and iodate are dissolved ions. Elemental iodine, I2, is only sparingly soluble in water. A result reported as total iodine does not identify which species are present.

Why the distinction matters for water treatment

The parent iodine and water overview explains sources, occurrence and treatment considerations. Treatment selection depends on the iodine species, concentration, competing salts and organic matter. A soluble iodine salt should not be treated as a suspended particle; removing visible solids alone does not establish that dissolved iodine has been removed.

When interpreting an analysis, check whether the result is expressed as iodine, iodide, iodate or the original salt. These are not interchangeable mass concentrations. Identify the relevant iodine species and assess the water matrix before evaluating adsorption, ion exchange or membrane treatment.

Sources and further reading