Grundfos TPED 125-160/4 A-F-A-BAQE-MWA (99114562)
Product ID: 99114562
Request Price and Availability
Grundfos TPED 125-160/4 A-F-A-BAQE-MWA (99114562)
Grundfos TPED 125-160/4 A-F-A-BAQE-MWA (99114562)
Single-stage, close-coupled, volute twin-head pump with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. Pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
| Specification | Value | |
|---|---|---|
| Controls: | ||
| Frequency converter: | Built-in | |
| Liquid: | ||
| Pumped liquid: | Water | |
| Liquid temperature range: | 0 .. 120 °C | |
| Selected liquid temperature: | 20 °C | |
| Density: | 998.2 kg/m³ | |
| Technical: | ||
| Pump speed on which pump data are based: | 1455 rpm | |
| Rated flow: | 133 m³/h | |
| Rated head: | 12.8 m | |
| Actual impeller diameter: | 211 mm | |
| Primary shaft seal: | BAQE | |
| Code for shaft seal: | BAQE | |
| Curve tolerance: | ISO9906:2012 3B2 | |
| Materials: | ||
| Pump housing: | Cast iron | |
| EN-GJL-250 | ||
| ASTM class 35 | ||
| Impeller: | Cast iron | |
| EN-GJL-200 | ||
| ASTM class 30 | ||
| Installation: | ||
| Range of ambient temperature: | -20 .. 50 °C | |
| Maximum operating pressure: | 16 bar | |
| Max pressure at stated temp: | 16 bar / 120 °C | |
| Pipe connection standard: | EN 1092-2 | |
| Type of connection: | DIN | |
| Size of connection: | DN 125 | |
| Pressure rating for connection: | PN 16 | |
| Port-to-port length: | 620 mm | |
| Flange size for motor: | FF265 | |
| Electrical data: | ||
| Motor type: | 132MH | |
| Rated power - P2: | 7.5 kW | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 3 x 380-500 V | |
| Rated current: | 14.1-11.1 A | |
| Cos phi - power factor: | 0.93-0.89 | |
| Rated speed: | 180-2200 rpm | |
| IE Efficiency class: | IE5 | |
| Motor efficiency at full load: | 92.2 % | |
| Number of poles: | 4 | |
| Enclosure class (IEC 34-5): | IP55 | |
| Insulation class (IEC 85): | F | |
| Motor No: | 98971185 | |
| Others: | ||
| Minimum efficiency index, MEI ≥: | 0.46 | |
| Net weight: | 401 kg | |
| Gross weight: | 452 kg | |
| Shipping volume: | 1.87 m³ | |
Spare Parts
| Part Number | Product Name |
|---|---|
| 98164277 | Spare, Plug vent |
Applications
- Commercial air conditioning — Improve user comfort and reduce life-cycle costs with intelligent pumps that integrate easily into your air-based or hydronic cooling system.
category
- Inline single stage pumpsIn-line single-stage pumps are typically used in commercial buildings for air-conditioning and heating applications. The pumps are equipped with standard motors and mechanical shaft seals. They are close-coupled, meaning that the pump and motor are two separate units, making them less sensitive to impurities in the pumped liquid.