Grundfos 10S05-6

Product ID: 9013606

Request Price and Availability

Grundfos 10S05-6
Part Number: 9013606

Grundfos 10S05-6

10S05-6
Multi-stage submersible pump for raw water supply, groundwater lowering and pressure boosting. The pump is suitable for pumping clean, thin, non-agressive liquids without solid particles or fibres.

The pump is made entirely of Stainless steel DIN W.-Nr. DIN W.-Nr. 1.4301.

The motor is a 3-phase motor with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.

SpecificationValue
Liquid:
Pumped liquid:  Water
Maximum liquid temperature:  40 °C
Max liquid t at 0.15 m/sec:  40 °C
Liquid temperature during operation:  20 °C
Density:  998.2 kg/m³

Technical:
Speed for pump data:  3450 rpm
Shaft seal for motor:  LIPSEAL
Approvals on nameplate:  CE,EAC,CSACOMP
Curve tolerance:  ISO9906:2012 3B
Motor version:  T40

Materials:
Pump:  Stainless steel
   DIN W.-Nr. 1.4301
   AISI 304
Impeller:  Stainless steel
   DIN W.-Nr. 1.4301
   AISI 304
Motor:  Stainless steel
   DIN W.-Nr. 1.4301
   AISI 304

Installation:
Maximum ambient pressure:  15 bar
Pump outlet:  1 1/4"NPT
Motor diameter:  4 inch

Electrical data:
Motor type:  MS402
Rated power - P2:  0.37 kW
Power (P2) required by pump:  0.37 kW
Mains frequency:  60 Hz
Rated voltage:  3 x 460 V
Service factor:  1,60
Rated current:  1.6 A
Starting current:  460 %
Cos phi - power factor:  0,72
Rated speed:  3450 rpm
Start. method:  direct-on-line
Enclosure class (IEC 34-5):  IP68
Insulation class (IEC 85):  B
Built-in temp. transmitter:  no

Others:
Net weight:  8.6 kg
Gross weight:  9.9 kg
Shipping volume:  0.008 m³

[an error occurred while processing this directive]