Grundfos MSS.11.1.2 (97901037)
Product ID: 97901037
Request Price and Availability
Grundfos MSS.11.1.2 (97901037)
Supplied as complete unit ready for installation, the Multilift consist of a fully integrated collecting tank with pump and submersible motor, non-return valve, discharge adapter with flexible connection piece DN100 mounted on the collecting tank and a pre-wired Controller incl. a level sensor.
The fully integrated collecting tank has all necessary ports for the connection of inlet pipe in heights of 180mm and 250mm, vent pipe DN50 and a manually operated diaphragm pump (accessory).
The collecting tank contains 7 inlet sockets around it's shape. Back inlets 2x DN100 with one socket seal, socket for inlet at the sides 2 x DN100, top inlet DN100. 2x DN50 on top and side.
Multilift corrosion free polyethylen collecting tanks are gas- and odour-proof as well as watertight , reduction of residual water and less sedimentation by chamfered bottom design.
The pump with Vortex impeller and a maintenance free submersible motor, oil chamber with physiological harmless oil filling between two shaft seals. Motor protection via motor-protective circuit breaker inside pump head.
LC220 controller with microprocessor is equipped with LED for all monitoring necessities. The pump and sensor are connected to the controller with 4m or 10m cable and tube length. The power supply cable is 1,5m with plug (incl. phase inverter for 3 phase motor) Contactless, piezo resistive pressure sensor pluggable inside the cabinet, monitored by controller. Blockage free pressure tube inside the tank without movable parts inside wastewater.
The controller offer monitoring of pump operation.
Controller functions:
|
One additional input to connect a separate level switch to be used for flood detection outside the Multilift (external alarm). Lifting stations are often installed in a sump inside the basement at the lowest point in the building. In case of e.g. groundwater inflow or water pipe burst, an alarm will be indicated by the controller.
The Multilift range is designed due to the standard EN12050-1, approved and monitored by external institute LGA. Further approvals are VDE, GHOST, CB, EMV
| Technical: | |
| Pump speed on which pump data are based: | 2760 rpm |
| Rated flow: | 5.5 l/s |
| Maximum flow: | 8.61 l/s |
| Rated head: | 4.1 m |
| Type of impeller: | VORTEX |
| Max. Particle: | 40 mm |
| Approvals: | CE,EAC,CN ROHS,MORO,UKCA,SEPRO |
| CE approved (Yes/No): | Y |
| EN number for LGA approval: | Y |
| Non-return valve type: | Flap valve |
| Materials: | |
| Pump housing: | Composite |
| Tank: | PLASTIC |
| LDPE | |
| Gasket: | NBR |
| Installation: | |
| Range of ambient temperature: | 0 .. 40 °C |
| Type of outlet connection: | DIN |
| Size of outlet connection: | DN 80 |
| Pressure rating for connection: | PN 6 |
| Liquid: | |
| Liquid temperature range: | 0 .. 40 °C |
| Selected liquid temperature: | 20 °C |
| Density: | 998.2 kg/m³ |
| Electrical data: | |
| Power input P1: | 1.7 kW |
| Rated power - P2: | 1.1 kW |
| Mains frequency: | 50 Hz |
| Rated voltage: | 1 x 230 V |
| Voltage tolerance: | +10/-6 % |
| Max starts per hour: | 60 |
| Rated current: | 8 A |
| Cos phi - power factor: | 0.95 |
| Capacitor size - run: | 20 µF |
| Number of poles: | 2 |
| Start. method: | direct-on-line |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | F |
| Built-in motor protection: | KLIXON |
| Length of cable: | 1.5 m |
| Power plug: | SCHUKO |
| Controls: | |
| Type of control box: | LC220 |
| Tank: | |
| Total volume of tank(s): | 44 l |
| Total effective volume of collecting tank at 180 mm inlet: | 20 l |
| Total effective volume of collecting tank at 250 mm inlet: | 28 l |
| Others: | |
| Net weight: | 27.4 kg |
| Gross weight: | 38.1 kg |
| Danish VVS No.: | 154030011 |
| Norwegian NRF no.: | 9045302 |
| Country of origin: | DE |
| Custom tariff no.: | 84137021 |
| Environmental approvals: | WEEE |
Applications
- Commercial wastewater — Commercial buildings have vastly different requirements for wastewater transfer. Grundfos supplies wastewater pumps and lift station pumps ensure superior reliability and safety, as well as high efficiency.
- Domestic wastewater — With a series of optimised drainage pump systems, lifting stations and sump pumps, you can gain full control of domestic wastewater.