Grundfos MAGNA1 25-100 N (98254908)
Product ID: 98254908
Request Price and Availability
Grundfos MAGNA1 25-100 N (98254908)
The Grundfos MAGNA1 is a circulator pump with permanent magnet motor and easy selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The ideal choice for basic performance needs in applications where system communication is not required.
| Specification | Value | |
|---|---|---|
| Liquid: | ||
| Pumped liquid: | Water | |
| Liquid temperature range: | -10 .. 110 °C | |
| Liquid temperature during operation: | 60 °C | |
| Density: | 983.2 kg/m³ | |
| Technical: | ||
| TF class: | 110 | |
| Approvals on nameplate: | CE,VDE,EAC,CN ROHS | |
| Materials: | ||
| Pump housing: | Stainless steel | |
| EN 1.4308 | ||
| ASTM 351 CF8 | ||
| Impeller: | PES 30%GF | |
| Installation: | ||
| Range of ambient temperature: | 0 .. 40 °C | |
| Maximum operating pressure: | 10 bar | |
| Pipe connection: | G 1 1/2" | |
| Pressure rating: | PN10 | |
| Port-to-port length: | 180 mm | |
| Electrical data: | ||
| Power input - P1: | 9 .. 176 W | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 1 x 230 V | |
| Maximum current consumption: | 0.09 .. 1.42 A | |
| Enclosure class (IEC 34-5): | X4D | |
| Insulation class (IEC 85): | F | |
| Others: | ||
| Energy (EEI): | 0.22 | |
| Net weight: | 4.38 kg | |
| Gross weight: | 4.78 kg | |
| Shipping volume: | 0.012 m³ | |
| Danish VVS No.: | 380780100 | |
| Finnish: | LVI NO 4615589 | |
Applications
- Domestic hot water recirculation — With a hot water circulator pump, you can provide hot water to your customers in an instant, eliminating water waste and reducing the annoying wait for hot water.
category
- Circulator pumpsGrundfos circulator pumps are designed for best-in-class efficiency with low maintenance. Compared to conventional circulators, they cut energy consumption by up to 80 %, while delivering noise-free performance. Here you can find the right circulator pump for your heating, cooling and hot water recirculation needs.