Grundfos EF30.50 .06.E.Ex.2.1.502 (96877512)
Product ID: 96877512
Request Price and Availability
Grundfos EF30.50 .06.E.Ex.2.1.502 (96877512)
GRUNDFOS EF AUTOADAPT pump is a portable pump for both domestic and industrial applications.
The pump has a single-vane, semi-open impeller for 30 mm free passage and is suitable for pumping
|
The compact design makes the pump suitable for both temporary and permanent installation.
The pump is a cast iron submersible pump with integrated submersible explosion-proof 1-phase motor. Approvals: EN 12050-2
The pump has an intermediate oil chamber pre-filled with non-toxic special oil.
The pump is fitted with a cable plug for easy dismantling. This plug is hermetically sealed with polyurethane to prevent water from penetrating through the cable into the motor.
A clamp between pump housing and motor ensures easy and safe dismantling and assembly. Inspection can be done in the field without any special tools.
The pump is fitted with a double shaft seal in the unique cartridge design. This makes it easy to replace the shaft seal very quickly in the field without any special tools. It also eliminates the risk of faulty installation.
The motor is insulation class F and has long-life, deep-groove, greased-for-life ball bearings.
The Grundfos EF AUTOADAPT pumps incorporate a controller, sensors and motor-protection. They only need to be connected to the mains supply. If several pumps are installed in the same tank, the control logic incorporated in the pump will ensure that the load is distributed evenly among the pumps over time.
|
|
The Grundfos CIU unit can be connected permanent or temporarily for changing the pre-setting, further settings or read out from the logging and operation parameters like no. of starts and operating hours.
Another innovative patent in our AUTOADAPT pumps is a new way of controlling the motor current during start up. The result of this bring us a much higher starting tourque for the 1-phase motors than a conventional motor starter using start capacitor.
| Controls: | |
| Moisture sensor: | without moisture sensors |
| Water-in-oil sensor: | without water-in-oil sensor |
| AUTOADAPT: | Yes |
| Liquid: | |
| Liquid temperature range: | 0 .. 40 °C |
| Selected liquid temperature: | 20 °C |
| Density: | 998.2 kg/m³ |
| Technical: | |
| Rated flow: | 4.08 l/s |
| Maximum flow: | 7.78 l/s |
| Rated head: | 6.2 m |
| Type of impeller: | SEMI OPEN |
| Max. Particle: | 30 mm |
| Primary shaft seal: | SiC/SiC |
| Secondary shaft seal: | LIPSEAL |
| Max. hydraulic efficiency: | 63 % |
| Approvals: | EN 12050-2 |
| Curve tolerance: | ISO9906:2012 3B2 |
| Materials: | |
| Pump housing: | Cast iron |
| EN-JL-1030 | |
| Impeller: | Cast iron |
| EN-GJS-500-7 | |
| Installation: | |
| Range of ambient temperature: | 0 .. 40 °C |
| Maximum operating pressure: | 6 bar |
| Type of connection: | R |
| Size of connection: | 2 inch |
| Pressure rating for connection: | PN 10 |
| Maximum installation depth: | 7 m |
| Auto-coupling: | Y |
| Electrical data: | |
| Power input P1: | 1 kW |
| Rated power - P2: | 0.6 kW |
| Mains frequency: | 50 Hz |
| Rated voltage: | 1 x 230 V |
| Voltage tolerance: | +6/-10 % |
| Max starts per hour: | 30 |
| Rated current: | 6.5 A |
| Rated current at 3/4 load: | 4.1 A |
| Rated current at 1/2 load: | 3.4 A |
| Starting current: | 38 A |
| Rated current at no load: | 2.6 A |
| Cos phi - power factor: | 0.90 |
| Cos phi - p.f. at 3/4 load: | 0.86 |
| Cos phi - p.f. at 1/2 load: | 0.81 |
| Rated speed: | 2920 rpm |
| Locked-rotor torque: | 6.5 Nm |
| Breakdown torque: | 7 Nm |
| Moment of inertia: | 0.0035 kg m² |
| Motor efficiency at full load: | 61 % |
| Motor efficiency at 3/4 load: | 55 % |
| Motor efficiency at 1/2 load: | 42 % |
| Capacitor size - run: | 20 µF |
| Number of poles: | 2 |
| Method of start: | Direct-on-line (DOL) |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | F |
| Explosion proof: | yes |
| Built-in motor protection: | THERMAL SWITCH |
| Power cable type: | LYNIFLEX |
| Length of power cable: | 10 m |
| Power plug: | No plug |
| Others: | |
| Net weight: | 46.5 kg |
| Gross weight: | 51.9 kg |
| Danish VVS No.: | 391292622 |
| Country of origin: | HU |
| Custom tariff no.: | 84137021 |
Spare Parts
| Part Number | Product Name |
|---|---|
| 96106536 | Kit, Shaft seal BQQP |
| 96115107 | Kit, O-rings |
| 98682345 | Kit, Bearing |
Applications
- Commercial wastewater — Commercial buildings have vastly different requirements for wastewater transfer. Grundfos supplies wastewater pumps and lift station pumps ensure superior reliability and safety, as well as high efficiency.
- Wastewater transport — When continuously transporting wastewater, you need reliable and optimised solutions for wastewater pumping stations and networks. Better system design, for example by using CFD simulations, tackles hydraulic issues in advance, reduces downtime and minimises risk.
category
- Submersible wastewater pumpsGrundfos submersible wastewater pumps are designed as sealed units combining a pump and integrated motor that can operate below the surface of wastewater. Submersible wastewater pumps are perfect in permanent installations for efficient removal of wastewater from a property whether from washing machines, sinks and showers or drainage from the garden.