Lenntech Water treatment & purification Lenntech Water treatment & purification
Home > Research Paper Tags > Biosolids

Biosolids

1 - 3 of 3 results

... sand for the dewatering of faecal sludge with respect to the dewatering time, contaminant load in the percolate, rate of clogging and quantity of biosolids produced. Three filter media FM1, FM2 and FM3 were used to dewater the faecal sludge. The experiment was conducted on bench scale consisting o ...
Desalination 251 (2010)

The effect of pH, biosolid dosage, initial copper concentration, and contact time on copper removal from aqueous solutions using biosolids (waste sludge cake) was investigated through batch experiments. The copper removal increased by time and initial metal concentrations. Th ...
Desalination 239 (2009)

... that at loading rate of 100–200 kg TS/m2/yr, the system performed well for solid–liquid separation, with an average dry matter content of biosolids !30% and pollutant removal efficiencies higher than 77%, 86%, 90%, 90% and 95% for NH4+, TSS, TS, NTK and COD, respectively. Besides this primar ...
Desalination 251 (2010)

About Lenntech

Lenntech BV
Distributieweg 3
2645 EG Delfgauw

tel: +31 152 610 900
fax: +31 152 616 289
e-mail: info@lenntech.com


Copyright © 1998-2018 Lenntech B.V. All rights reserved