Lenntech Water treatment & purification Lenntech Water treatment & purification
Home > Research Paper Tags > Silt Density Index

Silt Density Index

1 - 3 of 3 results

... filtration techniques, two ultrafiltration and one microfiltration pilot plants were used in the experimental study. During the experiments, the silt density index (SDI) of the filtrate samples was regularly measured to quantify the performance of pretreatment systems in rejecting colloida ...
Desalination 159 (2003)

... between chemical cleanings varied between 10 days and 30 days depending on the operating conditions and seawater quality. During the tests, seawater silt density index (SDI) ranged between 6 to non-measurable while the microfiltered water SDI remained below 2 under the optimized operating conditions.
Desalination 153 (2002)

... of the water fouling potential could be a more sensible parameter, supplementing the analytical tools actually used for design purpose. The silt density index (SDI) is a parameter characterising the fouling potential of water. It is one of the most important parameter for the design an ...
Desalination 222 (2008)

About Lenntech

Lenntech BV
Distributieweg 3
2645 EG Delfgauw

tel: +31 152 610 900
fax: +31 152 616 289
e-mail: info@lenntech.com

Copyright © 1998-2018 Lenntech B.V. All rights reserved