Home > Research Paper Tags > Process modelling
1 - 3 of 3 results
... with a catalytic membrane located on the boundary of phases, of which one is a substrate reservoir, were formulated. A model analysis of the process was carried out and the effect of main operating parameters of such a reactor, i.e., the catalytic layer thickness and the coefficients of... transfer in the organic phase might have a significant influence on the process rate. Keywords: Enzymatic gel layer; Catalytic membrane; Process modelling; Multi-phase reactor 1. Introduction Due to broad substrate specificity, biocatalysts (enzymes, microorganism cells) are more often used fo ...
Desalination 162 (2004)
Modelling of the enzymatic synthesis of taste dipeptides with simultaneous extraction in a membrane phase contactor
The paper presents a model of the synthesis process of taste dipeptides carried out in a biphase water–organic phase system. An enzymatic conversion takes place within the aqueous phase where the... respect, a particularly interesting applicability is revealed by the reactor operating in a continuous system. Desalination 160 (2004) 113–122 Modelling of the enzymatic synthesis of taste dipeptides with simultaneous extraction in a membrane phase contactor A. Trusek-Holownia*, A. Noworyt ...
Desalination 160 (2004)
Operation of desalination process is sometimes a difficult task, especially when the plant is getting older. Process engineers and operators are required to follow-up any changes or variations in process parameters either in control room or on-site measurements.... values can be due to un-calibrated devices (i.e. flow-meters) or fouling of measurement devices (i.e. thermo-couples). Practically, process modelling is a useful tool that can assure and confirm that the process measurements parameters are accurate. Incorrect balancing of mass and/or energy ca ...
Desalination 222 (2008)