Lenntech Water treatment & purification Lenntech Water treatment & purification
Home > Research Paper Tags > Hydrogen separation

Hydrogen separation

1 - 3 of 3 results

... factor of 7.28 at the same temperature). Desalination 147 (2002) 425–431 Preparation and characterization of Pd-zeolite composite membranes for hydrogen separation F. Moróna, M.P. Pinaa, E. Urriolabeitiab, M. Menéndeza, J. Santamaríaa* a Department of Chemical and Environmental Engineering.
Desalination 147 (2002)

Palladium alloy composite membranes for hydrogen separation have been fabricated on a porous stainless steel (SS) support by the vacuum electrodeposition and laminating procedure of thi ...
Desalination 236 (2009)

... composition given in mass %) alloy film, coated on a Pall Corporation Membralox® T1-70 tubular ceramic substrate, which nearly meets the DOE pure hydrogen flux target of 200 scfh/ft2 at 400°C and 20 psi hydrogen partial pressure. Fig. 4. Pd/Cu phase diagram [40]. Pd/Cu alloy membranes were deposited... the alloy compostition of the membrane. Desalination 193 (2006) 224–229 High flux palladium–copper composite membranes for hydrogen separations Paul M. Thoen, Fernando Roa, J. Douglas Way* Department of Chemical Engineering, Colorado School of Mines, 1500 Illinois Street, Golden, CO 8040 ...
Desalination 193 (2006)

About Lenntech

Lenntech BV
Distributieweg 3
2645 EG Delfgauw

tel: +31 152 610 900
fax: +31 152 616 289
e-mail: info@lenntech.com

Copyright © 1998-2018 Lenntech B.V. All rights reserved