Lenntech Water treatment & purification Lenntech Water treatment & purification
Home > Research Paper Tags > Hollow fibers

Hollow fibers

1 - 3 of 3 results

In this work the preparation and characterization of gas separation hollow fibers based on polyethersulfone Sumikaexcel (PES) and polyimide Matrimid 5218 (PI) blends are reported. Scanning Electron Microscopy (SEM) wa ...
Desalination 145 (2002)

... distance, bore fluid composition, and take-up velocity on the structure and the permeation properties of polyethersulfone-polyimide gas separation hollow fibers are discussed in detail. It is shown that a spinning dope starts to exhibit significant chain entanglement at a critical polyme ...
Desalination 144 (2002)

Nickel hollow fiber membranes were prepared by a phase inversion and a sintering method. A nickel hollow fiber support was prepared by spinning the polymer solution containing suspended nickel powders to a hollow fiber precursor which is then sintered... nickel hollow fiber membrane was successfully fabricated on the nickel hollow fiber support by coating a finer nickel particle. The nickel hollow fibers were characterized using scanning electron microscope, porometry measurement, mercury porosimeter and three point bending test. The prepared nicke ...
Desalination 233 (2008)

About Lenntech

Lenntech BV
Distributieweg 3
2645 EG Delfgauw

tel: +31 152 610 900
fax: +31 152 616 289
e-mail: info@lenntech.com

Copyright © 1998-2018 Lenntech B.V. All rights reserved