Testomat Eco / Testomat 2000

Testomat ECO & Testomat 2000
Automatic hardness control
The Testomat automatic determines the residual/total hardness via titration. Ideal for the water quality after water softeners, water blender and drinking-water plants.
Testomat ECO Accurate Titration via piston dosing pump, with display of current measured value. Two adjustable limits with programmable switch functions. Technical data: max. operating pressure 1-8 bar operating temperature 10-40°C, automatic time set intervals (0-99 min) indicator solution in 500ml bottles 230V 50Hz. H x W x D = 480 x 380 x 280 cm Weight approx. 9,5 kg IP rating: IP65 Datasheet	Testomat 2000 The Testomat 2000 can also determine carbonate hardness, the p-value of the water. Two separate water input, to monitor multiple plants. Technical data: max. operating pressure 1-8 bar operating temperature 10-40°C, automatic time set intervals (0-99 min) indicator solution in 500ml bottles 230V 50Hz. H x W x D = 480 x 380 x 280 cm Weight approx. 10,5 kg IP rating: IP65 Datasheet	Direct Quotation For Testomat Eco, 2000 or for Testomat titration liquids
Measuring range, determined by the indicator liquid, see list below Art. nr. 152005 Water Hardness: TH-2005 indicator liquid for 0.05-0.50°D per 500ml Art. nr. 152025 Water Hardness: TH-2025 indicator liquid for 0.25-2.50°D per 500ml Art. nr. 152100 Water Hardness: TH-2100 indicator liquid for 1.0-10.0°D per 500ml Art. nr. 152250 Water Hardness: TH-2250 indicator liquid for 2.5-25.0°D per 500ml Art. nr. 153050 Carbonate Hardness: TC-2050 indicator liquid for 0.5-5.0°D per 500ml Art. nr. 153100 Carbonate Hardness: TC-2100 indicator liquid for 1.0-20.0°D per 500ml Art. nr. 155100 P-Value: TP-2100 indicator for 1-15 mmol/l Art. nr. 154005 minus-M-value: TM-2005 indicator for 0.05-0.50 mm/l Art. nr. 156235 Chlorine reagents set CIT 500A / 300B / 200C Art. nr. 156230 Chlorine reagents CL 2250 A, 500 ml Art. nr. 156231 Chlorine reagents CL 2250 B, 500 ml Art. nr. 156232 Chlorine reagents CL 2250 C, 500 ml Art. nr. 156250 Dissolved iron reagents FE-2005A Art. nr. 156251 Dissolved iron reagents FE-2005B

The Testomat Family

Testomat 2000: Automatically determines the residual or total water hardness, the carbonate hardness, the p-value or the minus-m-value via titration. The 2000 can measure two individual measuring points.

Testomat 2000 DUO: This analysis instrument enables the measurement of two different parameters simultaneous, e.g. two different measuring ranges for water hardness.

Testomat 2000 CAL: This Testomat correspond in function and suitability to the Testomat 2000, but has an additional calibration function in order to balance possible interference.

Testomat Eco: This Testomat is "the good value alternative" for the Testomat 2000, it determines through titration the water hardness from a single measurement point. The Testomat Eco or Testomat 2000 replace the Testomat F-bob

Testomat 2000 V: This Testomat version, in combination with a 3/2-way-motor operating valve is an easy to use control system for water blending plant

Testomat 2000 CLT: The process-photometer Testomat 2000 CLT is a wet-chemical online instrument for monitoring the content of total chlorine in the 0–2.5 mg/l (ppm) range and it can be switched to free chlorine.
• Analysis via automatic dosing of 3 reagents; the analysis result is displayed after a reaction time of approx. two minutes
• Application areas: Monitoring of chlorination plants for drinking water or swimming pools– Provides protection for reverse osmosis membranes.

Testomat 2000 CLF: The process-photometer Testomat 2000 CLF is a wet-chemical online instrument for monitoring the content of free chlorine in the0–2.5 mg/l (ppm) range.

Testomat 2000 THCL: The process photometer Testomat 2000 THCL determines the content of total chlorine in the 0 to 2.5 mg/l (ppm) range using the colorimetric analysis principle and the existing water hardness via titration.

Testomat Fe: The process photometer Testomat 2000 Fe is a wet-chemical online monitor for monitoring the content of dissolved iron (II) + (III) in the 0 to 1.0 mg/l (ppm) range using the colorimetric method.
• Dosing of 2 reagents and display of the analysis value after a reaction time of approx. 7 minutes (absolute measuring time without flushing times)

Lenntech has also the total range of Titromat analysis equipment.

Download Acrobat reader here

Testomat Eco / 2000

Testomat ECO & Testomat 2000

Testomat ECO

Testomat 2000

The Testomat Family