Home > Products > Measurement devices > Testomat: Automatic hardness controller

Testomat Eco / 2000

Testomat ECO & Testomat 2000

Automatic hardness control

 


The Testomat automatic determines the residual/total hardness via titration. Ideal for the water quality after water softeners, water blender and drinking-water plants.

 

Testomat ECO

Accurate Titration via piston dosing pump, with display of current measured value.
Two adjustable limits with programmable switch functions.

Technical data:

  • max. operating pressure 1-8 bar
  • operating temperature 10-40°C,
  • automatic time set intervals (0-99 min)
  • indicator solution in 500ml bottles
  • 230V 50Hz.
  • H x W x D = 480 x 380 x 280 cm
  • Weight approx. 9,5 kg
  • IP rating: IP65
  • Datasheet

Testomat 2000

The Testomat 2000 can also determine carbonate hardness, the p-value of the water.
Two separate water input, to monitor multiple plants.

Technical data:

  • max. operating pressure 1-8 bar
  • operating temperature 10-40°C,
  • automatic time set intervals (0-99 min)
  • indicator solution in 500ml bottles
  • 230V 50Hz.
  • H x W x D = 480 x 380 x 280 cm
  • Weight approx. 10,5 kg
  • IP rating: IP65
  • Datasheet

 


Direct Quotation

For Testomat Eco, 2000
or for Testomat titration liquids

Measuring range, determined by the indicator liquid, see list below
  • Art. nr. 152005 Water Hardness: TH-2005 indicator liquid for 0.05-0.50°D per 500ml
  • Art. nr. 152025 Water Hardness: TH-2025 indicator liquid for 0.25-2.50°D per 500ml
  • Art. nr. 152100 Water Hardness: TH-2100 indicator liquid for 1.0-10.0°D per 500ml
  • Art. nr. 152250 Water Hardness: TH-2250 indicator liquid for 2.5-25.0°D per 500ml
  • Art. nr. 153050 Carbonate Hardness: TC-2050 indicator liquid for 0.5-5.0°D per 500ml
  • Art. nr. 153100 Carbonate Hardness: TC-2100 indicator liquid for 1.0-20.0°D per 500ml
  • Art. nr. 155100 P-Value: TP-2100 indicator for 1-15 mmol/l
  • Art. nr. 154005 minus-M-value: TM-2005 indicator for 0.05-0.50 mm/l
  • Art. nr. 156235 Chlorine reagents set CIT 500A / 300B / 200C
  • Art. nr. 156230 Chlorine reagents CL 2250 A, 500 ml
  • Art. nr. 156231 Chlorine reagents CL 2250 B, 500 ml
  • Art. nr. 156232 Chlorine reagents CL 2250 C, 500 ml
  • Art. nr. 156250 Dissolved iron reagents FE-2005A
  • Art. nr. 156251 Dissolved iron reagents FE-2005B

The Testomat Family

Testomat 2000: Automatically determines the residual or total water hardness, the carbonate hardness, the p-value or the minus-m-value via titration. The 2000 can measure two individual measuring points.

Testomat 2000 DUO: This analysis instrument enables the measurement of two different parameters simultaneous, e.g. two different measuring ranges for water hardness.

Testomat 2000 CAL: This Testomat correspond in function and suitability to the Testomat 2000, but has an additional calibration function in order to balance possible interference.

Testomat Eco: This Testomat is "the good value alternative" for the Testomat 2000, it determines through titration the water hardness from a single measurement point. The Testomat Eco or Testomat 2000 replace the Testomat F-bob

Testomat 2000 V: This Testomat version, in combination with a 3/2-way-motor operating valve is an easy to use control system for water blending plant

Testomat 2000 CLT: The process-photometer Testomat 2000 CLT is a wet-chemical online instrument for monitoring the content of total chlorine in the 0–2.5 mg/l (ppm) range and it can be switched to free chlorine.
• Analysis via automatic dosing of 3 reagents; the analysis result is displayed after a reaction time of approx. two minutes
• Application areas: Monitoring of chlorination plants for drinking water or swimming pools– Provides protection for reverse osmosis membranes.

Testomat 2000 CLF: The process-photometer Testomat 2000 CLF is a wet-chemical online instrument for monitoring the content of free chlorine in the0–2.5 mg/l (ppm) range.

Testomat 2000 THCL: The process photometer Testomat 2000 THCL determines the content of total chlorine in the 0 to 2.5 mg/l (ppm) range using the colorimetric analysis principle and the existing water hardness via titration.

Testomat Fe: The process photometer Testomat 2000 Fe is a wet-chemical online monitor for monitoring the content of dissolved iron (II) + (III) in the 0 to 1.0 mg/l (ppm) range using the colorimetric method.
• Dosing of 2 reagents and display of the analysis value after a reaction time of approx. 7 minutes (absolute measuring time without flushing times)

Lenntech has also the total range of Titromat analysis equipment.

Download Acrobat reader here

 







Lenntech BV

Rotterdamseweg 402 M
2629 HH Delft
The Netherlands

tel: +31 15 261 09 00

fax: +31 15 261 62 89

e-mail: info@lenntech.com











Bookmark and Share