Bag Filter


Search :


Contact us


Bag filter

A Bagfilter works by the principle of microfiltration. The liquid is purified in bags by passing small permeable pores. Bagfilters can be used for large amounts of water
The sizes of these pores are between the 1-200 micron

The capacity depends on the surface area from the bags. Bigger systems can clean up to more than 500 m3 /h (multi bagfilters)

There are special bags for various chemicals

Engineering

The liquid flows from the top of the filter house (manufactured in either stainless or epoxy coated carbon steel) and is distributed equally amongst the bags. The liquid comes out at the bottom leaving the dirt behind.

Since the bag is locked in at the top of the vessel all the dirt is trapped inside the bag. The filter vessel never requires cleaning after use.

Bagfilters systems are applied is various industries solutions. Treated liquids include: milkproducts, paint, lime, beer etc.

Lenntech can also help  you with replacement from various filterbags.

Overview different kinds of filtermedia.

More information about sediment filters.

Snap-ring holder for gravity fed systems

Related topics:

Dirt holding capacity

Zeta potential

Click here for a comparison between bag filters and cartridge filters.

[ Home ] [ Back ] [ More Info ] [ MSDS ]

Copyright © 1998-2008 Lenntech Water treatment plants & air purification Holding B.V.
Rotterdamseweg 402 M
2629 HH Delft, The Netherlands
tel: (+31)(0)15 26.10.900
fax: (+31)(0)15 26.16.289
e-mail: info@lenntech .com