|
|
 |
|
Demister | |
| Generally mist filters is built from woven elements of metal or synthetic monofilaments. It is depth filtration where the gas flow are conducted by a certain configuration of filter elements. Separation takes place against the filter material. At depth filtration the filter functioning has been divided concerning the whole depth of the filter until satiety appears. The filter must be cleaned then by means of rinsing. High-efficient filter elements must be rinsed on regular basis seen the high chance on clogging. At the capture of drops or aerosols the filter can be self-cleaning. The advantages of demister are: |
|
The disadvantages of the demister are:
The demisters are generally placed after the boiler of the gas scrubber. They are used in the following industries:
Click here for more information for dust removal technologies For more books and reading information see our website:
| |
[ Home ] [ Back ] [ More Info ]
Copyright © 1998-2008 Lenntech Water treatment & air purification Holding B.V.
Rotterdamseweg 402 M
2629 HH Delft, The Netherlands
tel: (+31)(0)15 26.10.900
fax: (+31)(0)15 26.16.289
e-mail: info@lenntech .com
